• 商盟客服

    您好,歡迎蒞臨遠通工業設備,歡迎咨詢...

    宋經理: 點擊這里給我發消息
    正在加載

    觸屏版二維碼

    公司熱線: 13316615888
    YT-02系例電動執行器
    YT-02系例電動執行器

    YT-02系例電動執行器

    YT-02 series
     
    ◎Mini volume,exquisite appearance (L104-W70-H90)
                                          
    ◎Rated torque:20Nm
    ◎Protection level:IP67
    ◎Mechanical connecter: ISO5211(F03、F04、F05)
    ◎Out put bearing:male square12x12,female square 8x8,11x11,14x14
    ◎High performance brushless motor,it can be used up to 20000 times
    ※YT series is all for plastic housing: ABS /PC+PET
                   YT series is all for die casting aluminium outer case  finished:passivation and plastic spraying
     
     

    Product model Rated voltage time Additional function Operating characteristics note
    YT-02N
    normal on/off actuator
    DC12/24V 10S@DC series   Continuous operation
    passive contact feedback
    feedback asynchronous with arrival
    AC24/110/220V 15S@AC series   HTR (anti condensation heater) Discontinuous operation of ED=75%
    AC/DC24V 10S KT329(failsafe) Continuous operation
    AC/DC95-265V     HTR (anti condensation heater)  
    YT-02C
    intelligent on/off actuator
    DC12V
    AC/DC24V
    AC/DC95-265V
    10S
     KT32(failsafe)
    A(output fault signal)
    HTR(anti condensing heater)
    Continuous operation
    Synchronization of feedback signal with actual location
    With PUL speed regulation and PWM speed regulation
    0.9/1.3 inch OLED LCD screen
    Can be achieved: two or three, four position mode
    YT-02T
    intelligent modulating actuator
    DC12V
    AC/DC24V
    AC/DC95-265V
    10S
     KT32(failsafe)
    A(out put fault signal)
    HTR(anti condensing heater)
    Continuous operation
    0.9/1.3 inch OLED LCD screen
    Control feedback mode:
    4-20mA/0-20mA/0-10mA
    0-5V/1-5V/0-10V/2-10V
    YT-02B
    intelligent bus actuator
    DC12V
    DC24V
    AC95-265V(Not recommended) 
    10S
     KT32(failsafe)
    HTR(anti condensing heater)
    Continuous operation
    RS485,CANBus2.0 Profibus 
    with0.9/1.3寸OLEDscreen
    on/off actuator with PUL speed regulation and PWM speed regulation
    bus on/off actuator(ON、OFF、B33)
    bus modulating actuator,adjustment accuracy5‰
    YT-02D  intelligent timer actuator DC12V
    AC/DC24V
    AC/DC95-265V
    10S
    KT32(failsafe)
    HTR(anti condensing heater)
    Continuous operation
    with0.9/1.3寸OLEDscreen
    have rechargeable battery
    can stay more than 60days after power off
    Pulse timing mode、moment timing mode
    cycle by day,cycle by week
    YT-02R
    intelligent wireless actuator
    DC12V
    AC/DC24V
    AC/DC95-265V
    10S
    KT32(fail safe)
    HTR(anti condensing heater)
    Continuous operation
    wireless on/off actuator(ON、OFF)
    with0.9/1.3 OLEDscreen
    wireless modulating actuator,adjustment accuracy5‰
    communicate frequency:433/868/915MHZ
    LORA/FSK :  max2.5KM(open land)
    ENOCEN: 20-100m

    Dimension


    Main parts
     
     
      component material
    1 actuator  heat resistantABS/die casting aluminium
    2 Instruction window TransparentAS
    3 screwx4 304
    4 manual bearing 304
    5 manual bearing oil seal NBR
    6 label PVC
    7 hex wrench fixed card heat resistantABS/die casting aluminium
    8 hex wrench tool steel
    9 water proof NiLon
    10 upper and lower cover seals NBR

    Install the actuator and valve

     


    • Diagram1-1  UPVC plastic ball valve add bracket assembly
    • Diagram1-2  3-piece stainless steel ball valve assembly
    • Diagram1-3 Stainless steel 3-way ball valve assembly
    • Notice: 1.When install the actuator with valve,it’s recommend to use Spring Washer add flat washer to fix Screw and nut.
    • ※2.It’s forbidden to use Anaerobic glue or UV glue,if in need ,please use 704 glue and quick adhesive.
    • ※3.Casing is avoid contacting with organic solvent,such as kerosene, butanone and so on,or the casing
    • will be damaged

    Matched valve technical requirements
    • 1.When installing ball valve, the max torque ≤15Nm. If the ball valve is out of operation for a long time, and the torque value of first on or off is the max torque. Or you can choose ball valve with elastic sealing.
    • 2. When installing butterfly valve, the max torque≤13Nm. Because the torque value will increased by 10-20% after installing.
    • 3.When installing direct mount mode valve, the hole deep ≤15mm. It requires cutting if the output shaft is longer than 15mm.
    • 4. Please pay attention to the following items if you install the bracket and coupling by yourself:
    • ※ The intensity of bracket should meet the using requirements: the bracket twisting extent ≤0.2mm in the process of on or off.
    • ※ The parallelism of bracket ≤0.5mm.
    • ※ When processing the shaft hole at both end of the coupling, it is necessary to ensure the accuracy and concentricity. The purpose is to make sure the mechanical hysteresis ≤10°, otherwise it will cause the actuator unable to work.
    • 5. Screw should be installed spring washer、flat washer, and we suggest you daub some glue cement around the screw in case of screw loosening.
    • 6. After installation, user should switch the valve on and off one time with handle device first. Modifying the valve after make sure it works well
       

    Work environment
     

    • □ This product can be used indoor and outdoor.
    • □ This product is not explosion proof, do not use them in flammable and explosive environment.
    • □ You need to install protective device for the actuator if it is exposed to the rain or sunshine.
    • □ Please pay attention to the ambient temp.
    • □ When installing, you need to consider the reserved space for wiring and repairing.
    • □ When power on, it is not allowed to dismantle actuator and valve.
    • □ When power on, it is not allowed to do wiring.
    • □ ※Forbid dropped things hit the device and lead to improper operation.
    • □ ※Forbid to step on it which will cause device malfunction or personal accident.
    • □ ※It is forbidden to do wiring project in rainy day or when there is water splash.
    • □ 02 series is forbid to open the case for wiring,or it will damaged the Sealing performance
       

    Safety notice
    • □ In order to use the device safely for a long time,please pre-read the manual carefully to ensure correct use.
    • □ Notice item:Please understand the product specification and using method clearly to ensure personal safety or prevent device
    • □ In order to indicate damage and danger,here we classify them as “warning ” and “notice ※ ”.
    • □ Both of contents are very important,which should be obeyed strictly.
    • □ “Warning ”:It will cause death or serious injury if not obeyed.
    • □ “Notice ※ ”:It will cause slight injury or device damage if not obeyed.
    国产亚洲色视频在线_欧美变态人ZOZO禽交_老年妇女婬秽视频_日本按摩高潮s级中文片